24 Hours Hotline:+86-13611965409

Home > News > News Show News Show

The Quantitative Evaluation of API Steel Pipe

The time of issue:2014-7-14 11:13:37       Author:

More similar stainless steel pipe buying tips have been produced on the morphology of API steel pipe fracture surface. It could be expected in the case of API steel pipe carbide as well as the low alloy steel. On the other hand, the aim of low alloy steel heat treatment in the API steel pipe production process may include the isothermal quenching so that the API steel pipe micro structure consists mostly of ferrite. However, the API steel pipe and the relative small amount of austenite can be seen from the quantitative evaluation that is carried out by the relative volume of ferrite as well as carbon stabilized austenite in a range of three to twenty percent respectively.

It would mean that at the relative small proportion of API steel pipe in the fracture and the morphology could differ a little from the tensile elongation of the steel during most of the production process. Thus, the API steel pipe throughput determination can be analyzed in way of virtual workshop for steel pipes manufacturing, which can operate within three basic modes in a completely automatic manner. And the API steel pipe fracturing process can be bypassed since its manufacturing duration equals zero and the same process can be performed within the first following pipe manufacturing process.

For each of API steel pipe sighted modes, process throughput has to be determined so that the overall efficiency of steel pipe manufacturing can be ensured. In the API steel pipe workshop, the overall performance is based on each particular process and the API steel pipe throughput within particular mode will have directions and determination of design characteristics. Even though the API steel pipe manufacturing workshop can be analyzed as basic element of the new approach for manufacturing design, the measuring and efficiency definition of the new approach will result in more appropriate technological process optimization.

What is more, the API steel pipe manufacturing process duration and production resources rationalization can be achieved with ease. Furthermore, through API steel pipe queuing time intervals, a lot of bottlenecks can be predicted or even be overcome while the activities are pushed forward with spare time. In that manner additional possibilities can be foreseen for API steel pipe process optimization, which means this new approach can be recommended for other complex technological process designs of the API steel pipe production as well. Micro graph of the API steel pipe as well as the low alloy steel structure after cooling can be achieved from different temperatures by the means of retained austenite. In other words, although the quality of the micro graph is rather lower, they can be scanned from original pack in a clear manner, which is evident that the API steel pipe structure consists mostly of mixture plate.


Home | Products | Company Profile | News | Services | Contact Us | Online Inquiry | Sitemap Copyright © Shanghai Xin Lin Co.,Ltd.
We supply the following products: API steel pipe | black steel pipe | welded steel pipe