Common of Stainless Welded Steel Pipe Fittings

The time of issue:2014-4-25 10:13:41       Author:

Introduction of stainless steel pipe fittings
Stainless steel pipe fittings is a long hollow section steel, a large number of channels for transporting fluids such as oil, gas, water, gas, steam, etc. In addition, practice bending, torsional strength of the same lightweight, so it is widely used in manufacturing mechanical parts and engineering structures. Also used in producing all kinds of conventional weapons, the barrel, shells and so on. Stainless steel pipe fittings classification: seamless and welded steel pipe factors (pipe joints) two groups. By cross-part form can be divided into tube and formed tubes, circular steel is extensively applied, but there are some rectangular, rectangular, semi-round, hexagon, equilateral triangle, octagon and other unique-formed pipe.

For the steel pipe to withstand fluid stress check must be carried out to check the stress of hydraulic capability and high quality, the provision does not leak stress, wet or expansion of certified, some steel but also in accordance to the needs of the normal or need facet, curling check , flaring check, flattening checks. Seamless: seamless steel pipe or rock solid steel ingot is produced of the capillary tube by the piercing, and then by warm rolling, chilly rolling or chilly phone is produced. You should know the specifications of seamless steel pipe with external diameter thickness mm amounts. Hot-rolled and chilly rolled seamless steel pipe factors (allocated) seamless two.   Hot-rolled seamless steel tube sub-typical, minimal, method stress essential oiler pipe, large stress essential oiler steel pipe, steel pipe, stainless steel pipe fittings, essential oil cracking pipe, steel and other steel and other geological.

Cold (allocated) theme to sub-typical seamless steel pipe, minimal and method stress essential oiler pipe, large stress essential oiler steel pipe, steel pipe, stainless steel pipe fittings, essential oil cracking pipe, other steel, but also which includes carbon steel tube, alloy slim steel, stainless steel thin-walled steel pipe, formed steel. Hot rolled seamless tube external diameter typically higher than 32mm, wall thickness 2.5-75mm, chilly-rolled seamless steel pipe diameter can go to the division 6mm, wall thickness can be 0.25mm, external diameter thin-walled tube to 5mm thickness can be much less than 0.25mm , chilly than warm-rolled large dimensional reliability. Stainless steel pipe fittings with the interpersonal and financial improvement, its request has also been extra extensively famous. Will unquestionably provide a new alter in all locations.

• Prev:Stainless Welded Steel Pipe Fittings of Standard
• Next:Carbon Black Steel Pipe Requirement in Heavy I...