My Experience on Laying the Black Steel Pipe

The time of issue:2013-8-1 8:58:45       Author:

Black steel pipe is widely used to carry gas, or sometimes used to carry water. And it has been one of the irreplaceable parts of laying the black steel pipe actually. The black steel pipe is also rigid, cumbersome, sturdy and reliable. In order to ensure that there is no any gas leak, you are advised to lay the black pipe very carefully.

You will need to prepare some couplers, black pipe, tape measure, pipe cutter, pipe threader, fittings, 2 pipe wrenches, workbench, vice, thread-seal tape and non-corrosive paint and so forth. Good preparation should be the half of the success. So, you are advised to prepare it carefully.

First of all, you should measure the distance of pipe required for your project. It may require no more than a few feet to lay whether you re-route the system, add a branch or start from scratch or repair a leak. Measure it accurately.

Second, there are many T and elbow in the layout which require to cut the pipe and thread it. Then you need to put the thread-seal tape over the treads before attaching a coupler, elbow or T. You are advised to spray the joint with non-corrosive paint and move to the next section of pipe if you have twisted the attachment onto the threads of the pipe.

Third, when you lay your pipe, you are advised to check the measurements of your layout periodically. There is no the absolutely measurements, and you need to check it to ensure it can be controlled in a reasonable range. The measuremens may change a lot when you move toward the end of your system. So you are advised to re-check your measurements and adjust the distances.

The welded steel pipe and API steel pipe are also available.

More Steel Pipe Products, Please Click:

LSAW Steel Pipe

LSAW Steel Pipe

LSAW Steel Pipe

• Prev:Benefits of Using Black Steel Pipe
• Next:Tips on Painting Black Steel Pipe