Ways to Connect Steel Pipe & PVC

The time of issue:2014-3-25 10:23:18       Author:

Steel in many homes and buildings, railing, fence, ventilation are using pipes carrying gas or electricity. These pipes, like all steel, rust after exposure to moisture. In order to maintain its integrity and extend the life cycle of the pipeline, to protect them from moisture sealing surface rust and paint exterior paint. This is the most effective steps to protect from the inevitable occurred outside of any type of welded steel pipe rust and corrosion. And there are several ways to connect steel pipe &PVC.

Steel stacking and storage on site, not only presents a logistical problem, but a security issue as well. Unless you correct the stack welded steel pipe with strapping and wood splitters, fell wounded man in the pipeline opportunities are enormous. Stacking correct pipeline will also help you when you can save in the pipeline transported to a different location site. Through the pipe into the “one unit" you transform into a round pipe, can be easily picked up and moved with a forklift or other lifting machinery a solid block.

Currently there are available all kinds of pipe materials, including PVC, copper, aluminum and stainless steel. Stainless steel welded steel pipe is used in construction, food, pharmaceutical, petrochemical industry and automobile industry, as well as municipal and decorative purposes. Depending on tube diameter, wall thickness can vary greatly. Thin-walled tubes can be cut with a simple handsaw, but thick pipes need to use special tools. Thoroughly clean the pipes to remove grease, dust, dirt and salt deposits. Heavy cleaners and wipes is used to clean the pipes. Then wash with mineral oil and rags again. This eliminates the need to stay in the pipeline or grease residue remaining from the vacuum cleaner.

Steel grit, if it has a thousand surface may reduce adhesion. This is so made of stainless steel or chrome steel. Slightly rough surface is with metal grinding sandpaper - 200 grits or less. Wipe away all residues with a clean towel polished. Pipe applied primer. Grade metal is primer or automotive paint. Spray primer to the pipe and allow it to dry described in the instructions. Please note that if you are using a metallic paint system, designed specifically for steel, you may not need a primer. Please consult your paint application instructions for further information. Final coating of paint applied to a welded steel pipe oriented manufacturer's instructions. Typically, this involves coating the paint spray pipe, and then layered on the second layer before the paint is completely dried before coating. This is called wet applications.

• Prev:How to Clean Black Steel Pipe
• Next:A Comparison Between HFW and Contact Welding f...