How to Install Black Steel Pipe?

The time of issue:2013-11-12 8:41:39       Author:

In many people's opinion, the plumbing system consists of series of plastic pipes. When it comes to the plumbing system for conveying natural gas, black steel pipes are mandated. The flammable gases are dangerous and so there are amounts of regulations aimed at reducing the improper installation or repair. If you are planning to install black steel pipe used as gas line, your process must follow the local regulations.

It is necessary to purchase proper pipes with suitable size before installing process. Since the steel pipes are extremely strong and hard, it is barely possible to cut the pipes with unprofessional tools. It is easy thing to purchase 10-foot sections from local improvement stores. And in larger stores, it is easy to find pipes with various sizes. You need to measure the length of the gas line and calculate the pipes and fittings you need. If the ready-made pipes are a little shorter or longer than the desired demand, you can ask the stores to help you cut the pipe into required size.

There are threads at both ends of the black steel pipes. The pipes are joined together by tighten the pipes with fittings. During the screwing process, it will become harder and harder. It is necessary to tighten the fittings to avoid the leakage. But at the same time, it is not recommended to over-tighten the fittings. In particular, it is not easy to control the tightening situation while joining the fittings with large wrenches. The proper way is to tighten the fittings by hands and then use wrenches for extra two turns.

When you begin to install black steel pipe, you need to make sure that the gas supply has been shut down. The strapping is needed to support the weight of pipes. Due to the easy assembly of plastic strapping, they have replaced the place of metal strapping. And it has been estimated that the plastic strapping can endure the weight from gas pipes for domestic purposes. At the end of the task, you need to check for leaks and insure the security. Leaked gases will lead to dangerous accidents. To find any leaking areas, you can spray soapy water at the joints' areas. If the bubbles appear and become larger, you should shut off the gas valve and tighten the joints immediately.

The welded steel pipe and API steel pipe are also available.

More Steel Pipe Products, Please Click:

LSAW Steel Pipe

Square Tube

Reducer

• Prev:Learn How to Protect Black Steel Pipe
• Next:What Is the Advantage of Stainless Steel Pipe?